IDFB-8-1500
| General information | ||
|---|---|---|
| Equipment type: | Induced draft fan | |
| Name: | IDFB-8-1500 | |
| English name: | DN-8-1500 | |
| Notes: | Backward curved blades. Running wheel on the electric motor shaft. | |
| Description for IDFB-8-1500 |
|---|
| Single inlet centrifugal ID Fans are intended to be used for flue gas removal from combustion chambers of solid fuel or gas-and-oil-fired boilers equipped with dry ash catchers. It is allowed to install such ID Fans in processing systems for handling compatible gases (The dustiness should be not more than 2 g/m3, abrasion and sticking tendency should be similar to ashed flue gases). Such ID Fans can be applied for single or serial-parallel operation. Double inlet centrifugal ID Fans can have right-hand or left-hand rotational direction. The right-hand rotation is in a clockwise order and it should be defined at electric motor side. The blades of impeller are backward curved. |
| Aerodynamic characteristics | ||
|---|---|---|
| Capacity: | 10.5 | ths. m3/h |
| Total pressure: | 1430 | Pa |
| Dimensions* | ||
|---|---|---|
| Length (L): | 1360 | mm |
| Width (W): | 1825 | mm |
| Height (H): | 1485 | mm |
| Weight: | 540 | kg |
| Electric motor | ||
|---|---|---|
| Actuator power?: | 15 | kW |
| Rotation frequency: | 0 | rpm |
| Moment of inertia: | 6,65 | kg*m2 |
| Overall drawing IDFB-8-1500 * |
|---|
|
| Railway delivery options | ||
|---|---|---|
| Platforms: | 1 | |
| Wagons: | 0 | |
| Transporters: | 0 | |
| Additional components | ||
|---|---|---|
| Actuator: | 100 | Nm |
help_oprosnik