Pulling block chains

Name	Minimum	Maximum	Unit
Pitch, t	40	160	mm
Pin length (b1) max	35	260	mm
Internal plates distance (b3) min	15	110	mm
(b4) max	49	370	mm
D1	6,0	60,0	mm
D2	9,0	85,0	mm
D3	12,5	118,0	mm
Height (H)	18	150	mm
Plate thickness (S) / Bushing bore diameter (S) min	2,5	22,0	mm

Name	Ultimate tensile strength, kgf	Pitch, t, mm	Pin length (b1) max, mm	Internal plates distance (b3) min, mm	(b4) max, mm	D, mm	D1, mm	D2, mm	D3, mm	Height (H), mm	Plate thickness (S) / Bushing bore diameter (S) min, mm
M 20	20 (2000)	40-160	35	15	49	-	6,0	9,0	12,5	18	2,5
M 28	28 (2800)	50-200	40	17	56	-	7,0	10,0	15,0	20	3,0
M 40	40 (4000)	63-250	45	19	63	-	8,5	12,5	18,0	25	3,5
M 56	56 (5600)	63-250	52	23	72	-	10,0	15,0	21,0	30	4,0
M 80	80 (8000)	80-315	62	27	86	-	12,0	18,0	25,0	35	5,0
M 112	112 (11200)	80-400	73	31	101	-	15,0	21,0	30,0	40	6,0
M 160	160 (16000)	100-500	85	36	117	-	18,0	25,0	36,0	45	7,0
M 224	224 (22400)	125-630	98	42	134	-	21,0	30,0	42,0	56	8,0
M 315	315 (31500)	160-630	112	47	154	-	25,0	36,0	50,0	60	10,0
M 450	450 (45000)	200-800	135	55	185	-	30,0	42,0	60,0	70	12,0
M 630	630 (63000)	250-1000	154	65	214	-	36,0	50	70,0	85	14,0
M 900	900 (90000)	250-1000	180	76	254	-	44,0	60,0	85,0	105	16,0
M 1250	1250 (125000)	315-1000	230	90	310	-	50,0	71,0	100,0	120	20,0
M 1800	1800 (180000)	400-1000	260	110	370	-	60,0	85,0	118,0	150	22,0
MS 28	28 (2800)	63-160	42	17	-	8,3	13,0	17,5	22,5	26	3,0
MS 56	56 (5600)	80-250	48	23	-	10,3	15,5	21,0	27,0	36	4,0
MS 112	112 (11200)	100-315	67	31	-	14,3	22,0	29,0	38,0	51	6,0
MS 224	224 (22400)	160-500	90	42	-	20,3	31,0	41,0	53,0	72	8,0

help_oprosnik